Sumo 19SE
19" HDR Video Monitor & Recorder
Firmware
Fixes:
- Fix for issue with Monitoring Video in 4x ISO Mode
Refer to the AtomOS 09.40.02 Release Notes for more information on the new features, improvements, and known limitations.
Firmware Update Procedure:
ATOMOS recommends that your Sumo 19SE is plugged into mains power before commencing the firmware update.
- Insert a compatible, formatted SSD into the Docking Station.
- Unzip the downloaded file and copy the ATOMSSE.FW file to the root of the SSD.
- Eject the SSD (according to operating system guidelines).
- Insert the SSD into the Sumo 19SE.
- Power on the Sumo 19SE and the firmware update process will begin automatically.
- If your Sumo 19SE is already powered on, you will be prompted to perform the firmware update when a drive containing new firmware is inserted.
- Once the update is complete, your Sumo 19SE will power itself down.
- Power your Sumo 19SE back on.
- To verify if the firmware update was successfully completed, navigate to the info menu where the currently installed firmware version is listed.
Previous Firmware
AtomOS 09.40.01
AtomOS 09.40.00
AtomOS 9.32
Resources
Sumo PRO-19
19″ 4K Monitor-Recorder-Switcher
Current Firmware
Upgrading to AtomOS 12.7.3
Improvements for Sumo PRO-19:
- Added support for Sony FX5 including Raw video handling and Camera Control
- New ‘FLog2-C Eterna’ gamma option with a dedicated EL Zone False Colour table calibrated specifically for Eterna cameras
- Improve EL Zone performance
- Added FLog2-C/FGamutC as loop-out options for Fujifilm RAW
- Added SLog3 Full Range log profile
- Improved Log handling for HLG, FLog, FLog2, and FLog2-C
- Improved Camera-to-Cloud for interlaced footage
- Added support for recording interlaced as H.265 in 8-bit 4:2:0
- Enabled Frame grab support for interlaced and 720p video
See www.atomos.com/sumo-pro-certified/ for supported storage & accessories.
For more information, please refer to the Release Notes for AtomOS 12.7.3.
Firmware Update Procedure
Atomos recommends connecting the Sumo Pro-19 to a stable external power source using the supplied AC power adapter, and ensuring power is maintained until the firmware update is complete.
- Unzip the downloaded file and copy the firmware file onto a compatible, formatted CFexpress card or USB-C SSD.
- Insert or connect the media to the Sumo PRO-19.
- With the Sumo PRO-19 powered on, navigate to the Firmware menu and press Choose File.
- Select the file you copied to your media. The file will be copied onto the device and the unit will return to the Firmware menu.
- Press Install to begin the installation process.
- Once installation is complete, the device will restart and run the new firmware.
- To confirm the update, navigate to the main menu and open the Info tab.
Sumo PRO-19 also supports Over-The-Air updates. For more information, see the Firmware tab on your device.
Previous Firmware
AtomOS 12.7.2
AtomOS 12.7.1
AtomOS 12.7.0
AtomOS 12.6.3
Join the Atomos Community!
Sign up to get the latest Atomos news, filmmaking tips, firmware updates, and early access to new products and cloud tools.