![Neon 17](https://www.atomos.com/wp-content/uploads/2023/07/NEON17-NAV.png)
Neon 17
17” Precision HDR Monitor & Recorder
Current Firmware
NEON AtomOS 10.25
Features:
- Added controls to the Button Bar Remote Control Unit (BBRCU)
- Selection of the active Color Space in use by pressing F1.
- Selection of the SDI or HDMI input or output, by pressing F5, (formerly the Record button).
- Button illumination is now adjustable, so that you can adjust the brightness of the backlight to match the
environment you are in.
- Enhanced SDR/REC709 color space to target measurements of below 2.3 deltaE 2000
- Calibration now provides industry-standard calibration of REC709 at 100 Nits.
- PDF Report of the REC709 calibration result available when calibration is complete.
- HDR (PQ and HLG – both in legal range) provide preview grade quality viewing.
Firmware Update Procedure:
- Unzip the ATOMNEO.zip file and copy the ATOMNEO.FW Firmware to your SSD drive.
- Ensure that your NEON is not powered on.
- Insert the SSD into the NEON.
- Power on your NEON.
- The NEON will display the progress of the upgrade on screen.
- The device will turn off and delete the firmware file after completing the installation.
For further information and troubleshooting, click here.
Previous Firmware
NEON AtomOS 10.24
NEON AtomOS 10.22
Resources
![Neon 24](https://www.atomos.com/wp-content/uploads/2023/07/NEON24-NAV.png)
Neon 24
24” Precision HDR Monitor & Recorder
Current Firmware
NEON AtomOS 10.25
Features:
- Added controls to the Button Bar Remote Control Unit (BBRCU)
- Selection of the active Color Space in use by pressing F1.
- Selection of the SDI or HDMI input or output, by pressing F5, (formerly the Record button).
- Button illumination is now adjustable, so that you can adjust the brightness of the backlight to match the
environment you are in. - Enhanced SDR/REC709 color space to target measurements of below 2.3 deltaE 2000
- Calibration now provides industry-standard calibration of REC709 at 100 Nits.
- PDF Report of the REC709 calibration result available when calibration is complete.
- HDR (PQ and HLG – both in legal range) provide preview grade quality viewing.
Firmware Update Procedure:
- Unzip the ATOMNEO.zip file and copy the ATOMNEO.FW Firmware to your SSD drive.
- Ensure that your NEON is not powered on.
- Insert the SSD into the NEON.
- Power on your NEON.
- The NEON will display the progress of the upgrade on screen.
- The device will turn off and delete the firmware file after completing the installation.
For further information and troubleshooting, click here.