TECH SPECS
StudioSonic Shotgun Mic
Physical
Dimensions
Transmitter: Φ22mm x L224mm, Receiver: 54mm x 48mm x 22mm
Weight
Transmitter: 94gms, Receiver: 29.5gms
Environmental
Ambient operating temperature
Up to 40 degrees Celsius
Construction & Control
Body
Aluminium alloy (mic); ABS (receiver)
Power
Battery
Transmitter: Li-polymer 3.7V 350mAh; Receiver: Li-polymer 3.7V 330mAh
Battery life
Transmitter: Wired mode 32-50 hours; wireless mode 8-10 hours; on-board recording mode 5 hours. Receiver: 8 hours
Wi-Fi
Frequency
2.4GHz
General
Transmitting Power
+10dBm
Receiving Sensitivity
-96dBm
Antenna
Ceramic
Sound Delay
<20ms
Polar Pattern
Super cardioid
Frequency Response
20Hz ~ 20kHz
Low-cut
-3dB @ 100Hz
High-frequency Boost
+3dB @ 10kHz
Output Impedance
600Ω
Sensitivity
-38dB ~ -18dB re 1V/Pa (12mv ~ 125mv @ 94dB SPL) ±2dB @ 1kHz
S/N
75dB SPL (A-weighted, as per IEC651)
Equivalent Noise
19dB SPL (A-weighted, as per IEC651)
Maximum SPL
130dB SPL(@ 1% THD)
Dynamic Range
111dB SPL (A-weighted, as per IEC651)
Analog Output
3.5mm TRRS/TRS
Digital Output
USB-C 48kHz/24-bit
Box Contents
StudioSonic Shotgun Microphone, 2.4GHz RX receiver with USB locking connector, Atomos USB-C to USB-C locking cable, 3.5mm TRS cable, wind fur and foam shield, adjustable pole mount, Atomos Quick Release mount, premium Atomos case
Warranty
Standard
1 year. Extended to 2 years on product registration.
The Atomos shop is currently available in Australia, EU, UK and USA.
More regions are coming soon!
For a reseller in your area, see here